Telescoping Boom Lifts Key Terms
Learn the meanings of telescoping boom lifts key termsTelescoping boom lifts are boom lifts with extension arms that reach longer than the average human arm. These lifts are used for many industrial jobs including power line work, landscaping, and any job that is elevated above normal reach. These boom lifts extend an average of 60 feet above the ground. When shopping for a boom lift you might come across words you are not familiar with. Review the telescoping boom lifts key terms so you can shop with confidence and ease.
ANSIANSI, or American National Standards Institute, is a national committee that inspections all types of products and services. The ANSI coordinates with other government agencies to create standards and regulations.
JibThe jib is the telescoping arm on the boom or crane. Jibs are measured in working height, which is the total length the boom will extend for safe working conditions.
Power shift transmissionA power shift transmission is a manual transmission that does not require the driver to let off the accelerator in order to shift gears. With a power shift transmission, the time the wheels are not powered is reduced. This type of transmission often wears the clutch out sooner than a traditional, manual transmission.
Hydrostatic driveA hydrostatic drive is a system that uses pressurized hydraulic fluid to run the mechanics of the system. These systems use minimal gas. A hydrostatic drive is also called a hydraulic drive system.
MGBPMaximum ground bearing pressure, or MGBP, is the estimate of the load capacity of a telescoping boom lift. The measurement is available for all boom lifts. This is measured in PSI, or pounds per square inch.
Copyright © 2013 Business.com, Inc. All Rights Reserved.