UPS Batteries
Tips & Advice to help you make your decision on UPS Batteries
In the event of a power failure, uninterruptible power supply batteries can provide a lifeline for your business. Unlike a generator or emergency power system, UPS batteries begin working immediately during a power loss without the need for manual activation. This can be crucial in medical buildings, factories, or technology businesses in which a power outage could result in death, injuries, or catastrophic data losses.
Before purchasing UPS batteries, it is recommended that you analyze your company's power needs. Large businesses may require the N+1 system, in which multiple smaller UPS modules are installed rather than one single module in order to increase reliability. When outdoor use is required, it may be necessary to protect the UPS battery with a heater or air conditioner that guards against extreme temperatures. Offline UPS systems may be a cost-effective choice for smaller operations, but only provide basic functions such as battery backup and surge protection. Double-conversion systems can offer more reliable protection and longer battery life, but they tend to cost more.
Selecting the safest backup power for your enterprise depends on factors like safety, security, and network size. If you're sorting through options, Business.com can be a helpful resource. Click on the links to the left to find out more.
UPS Batteries Key Terms
Learn about the uses for UPS batteriesBy Terri Deno UPS (uninterruptible power supply) batteries are used in electrical devices that provide battery backup for computer systems and other sensitive power loads. UPS battery systems are made from a number of units, each with its own battery. This configuration is to ensure that, if one unit fails, another unit or units will pick up the excess load. These batteries are rechargeable and can hold this charge for long periods. This extra power is used when there is a failure in the main power supply.
Battery conditioning, battery exercising
Battery conditioning is the process of purposely discharging a battery down to a minimum voltage and then recharging it. This is used to reduce the memory effect when batteries are not fully discharged before recharging.
Try:
American Battery provides information on battery conditioning for many types of UPS batteries.
Backup time
The backup time is the time when a UPS battery supplies the power load when the main power is down. This time ranges from five minutes to several hours depending on the efficiency of the UPS battery.
Try:
Backup How To provides information on UPS battery backup time and how to calculate the time for specific battery types.
Circuit breaker
A circuit breaker is a product connected to a UPS that helps to protect the battery when circuits over load.
Try:
Power Battery provides specifications for circuit breaker systems used for DC volt UPS batteries.
Inverter
An offline or standby inverter is a product used in some UPS configurations to back up the main power source. This configuration reduces costs, but can only be used for low power output.
Try:
UPS Inverter provides the technical specifications for a UPS inverter used in UPS power configurations.
Protection Index (IP)
The Protection Index is a measure of the UPS' capacity to resist environmental conditions of an electrical device. The IP is comprised of two or three digits that detail the type of risk. Higher numbers equal a greater capacity to resist environmental factors.
Try:
EZ Screen provides charts that explain the level of environmental resistance and corresponding IP numbers.
Voltage
The voltage of a battery is the measurement of the ability for the battery to maintain a charge level. Voltage is determined by the type and size of the battery.
Try:
Electric Circuits and Networks provides information on UPS battery management and how voltage can affect reliability of the battery.
Ensure Functioning of UPS Batteries As Per Manufacturer Specifications!
Super Low Prices and Free Shipping! Shop UPG UPS Replacement Batteries.
