RF microwave connectors have become a large industry. A wide selection of connector types is available, and more are being developed each year. They are primarily used in coxial connections, but can also be used as the ends of coaxial cables. These connectors are commonly used in houses and circuit boards.
The different types of connector have different cutoff frequencies. When the frequency goes above this limit, the TEM mode will stop propagating. The higher the frequency needed, the higher the cost of the connector.
There are several main connector families. The TNC connector was developed to minimize vibration problems, and has three standards. These standards are for ...
more
RF microwave connectors have become a large industry. A wide selection of connector types is available, and more are being developed each year. They are primarily used in coxial connections, but can also be used as the ends of coaxial cables. These connectors are commonly used in houses and circuit boards.
The different types of connector have different cutoff frequencies. When the frequency goes above this limit, the TEM mode will stop propagating. The higher the frequency needed, the higher the cost of the connector.
There are several main connector families. The TNC connector was developed to minimize vibration problems, and has three standards. These standards are for frequency limits of 11, 16, and 18 GHz. N adapters come in two main formats, with 11 and 18 GHz limits, and are fairly cheap and robust. Although they were developed in the 1940's, N adapters are still in widespread use. SMA connectors are available in 18 and 27 GHz formats. This is the most common RF microwave connector in current use.
The connectors are also made from different types of material. Brass and stainless steel are most commonly used. The brass connector can be damaged if too much torque is applied.
If you want to learn more about RF microwave connectors, click on the links on this page, which were researched and compiled by Business.com.
