Semiconductor Clean Room Monitors

Home » Technology » Semiconductor Clean Room Monitors

Tips & Advice to help you make your decision on Semiconductor Clean Room Monitors

A clean room is often used in scientific research or in manufacturing when it is necessary to control the level of contamination. Semiconductor clean room monitors may be used to alert your personnel of potential dangers, such as toxic gas leaks, fires, and more.

There are many manufacturers that produce semiconductor clean room monitors. Sierra Monitor Corporation is one company that provides systems to protect your workers from hazards. The Sentry gas detection system is one of the products this company can provide. This system works plant-wide and can monitor combustible gas, oxygen deficiencies, and toxic gasses.

Another potential system you may wish to use is the ammonia and hydride gas monitor. This system detects ammonia and hydride, and is available at a low cost as a stationary model. This system activates once the gasses exceed 5 ppm Silane or 50 ppm Ammonia.

If you will be working with combustible materials you may wish to purchase a semiconductor wet bench flame detector. These detectors are designed to be used in harsh conditions, so they are good for testing in high heats.

If you would like more information about semiconductor clean room monitors and how they can benefit your business and protect your employees, visit the links on this Business.com page.

Sorting Through a Variety of Semiconductor Clean Room Monitors

In a laboratory or manufacturing setting where contamination control is important, you’ll need equipment to monitor that. Finding reliable semiconductor clean room monitors can be helpful in keeping track of contamination levels. The product you choose will depend on the environment and special requirements of your clean room. Your selections of monitors to choose from can calculate contamination in a variety of ways.

Particle Counters

Particle counters can be found in a table top form as well as handheld. The handheld counters can be convenient for many reasons. As a smaller piece of equipment, it can be taken anywhere and put aside when not in use. With a smaller monitor it is compact and easily held in anyone’s hand. The HPC600 6-Channel Handheld Particle Counter is a little device with all the capabilities of a large table top monitor. From here you can utilize the built in printer for on-demand date documentation, or remotely download the information to a computer. If it isn’t necessary to have an easy to carry clean room monitor, a tabletop option might better suit your needs. With all the same capabilities, the larger piece of equipment can display levels and data in a larger, and easier to read format.

Airflow Meters

For an HVAC engineer or technician, a portable air flow meter could change the way business is done. Airflow monitoring is a critical aspect to this job. A portable meter is small, and can be placed anywhere in your clean room. You can easily read temperature and air flow levels on the digital LCD display. The AirGard® Air Velocity Monitor mounts to the clean room control panel and provides a constant reading. What sets this monitor apart is the built in alarm system. When air speed falls below a certain point you will be able to see and hear the alarm alerting you to the air change. If you are working in an environment where the monitor is not in constant view, this is a smart way to be aware at all times of where your air flow is within your clean room.

Deciding why, where and what kind of semiconductor clean room monitors would be most useful can be confusing. If you aren’t already educated in clean room monitors, it can be helpful to read through industry expert commentary and comparisons. This can help guide you in making a purchase that will best suit the needs of your clean room.